How To Flash Stock Rom Firmware On Micromax E484

Download Micromax E484 Stock Rom

Flash File Name: Micromax_E484_MT6795_V1_140116
Flash File Size: 1 GB

How to Flash Stock Firmware ROM on Micromax E484

To install the Stock Firmware on Micromax E484 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Micromax E484 .

STEP 1: Download and Install the Micromax E484 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Micromax E484 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.

STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.

STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory.

STEP 8: Now click the Download button to start the downloading process.

STEP 9: After completed all the above steps, connect your Micromax E484 to your system using the USB cable and , press any button other than power button so that your system will detect your Micromax E484 Device. You can use volume buttons.

Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Micromax E484 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Micromax E484 using SP Flash Tool.